Purpose
Removes grime, stains, fish blood, oil, grease, black streaks and soot.
Excellent multi-surface and deck cleaner!

Use on
Interior surfaces, counter tops, ginks, seating, control panels, engine rooms, berths, etc.

Directions
Spray on surface top be cleaned. Allow 15-30 seconds to penetrate then wipe clean with a sponge or cloth. For stubborns stains, allow 1-3 minutes let lightly scrub with brush or sponge then wipe clean with a fresh sponge or cloth.

Purpose
Cleans the Dirtiest of Hulls, Removes Water and Scum Lines, Fish Blood and Tannin Stains. Will Not Damage Trailers (Aluminum, Galvanized, or Painted).

Use on
Can be used on all surfaces: Ceramic Coatings, Pre-Waxed Surfaces, Fiberglass, Plexiglas, Vinyl, Metal, Glass, Plastics, Rubber, Painted Surfaces, Carpets, and Decals.

Directions
Apply using a sponge or sprayer. Allow to remain on surface for 2 minutes then rinse with fresh water. Severely stained or dirty surfaces may require a second application and/or light scrubbing with a brush or sponge.

Purpose
Concentrated, streak free, high-sudsing detergent. Removes grime, stains, fish blood, oil, grease, black streaks and soot. Excellent multi-surface cleaner!

Use on
Can be used on all surfaces: Ceramic Coating, Pre-Waxed Surfaces, Teak Wood, Fiberglass, Plexiglas, Vinyl, Metal, Glass, Plastics, Rubber, Painted Surfaces, Carpets, and Decals.

Directions
Wet Surface to be cleaned thoroughly before applying. Mix at least 1-4 ounces per gallon of water. Apply with cloth, sponge or brush. Scrub as necessary and rinse. Dilution may be adjusted as needed to accommodate soil conditions.

Purpose
Removes grime, stains, fish blood, oil, grease, and soot. Excellent multi-surface cleaner!

Use on
Can be used on all surfaces: Fiberglass, plexiglas, Vinyl, Metal, Glass, Plastics, Rubber, Painted Surfaces, Carpets, Decals Engines, Bilges, Chassis, Wheels, and Tires.

Directions
Before using, wet surface with fresh water. Liberally apply to area to be cleaned and spread evenly with a deck brush. Allow to work for 2-3 minutes. Scrub the treated area thoroughly before rinsing with fresh water. If deck is heavily soiled or has stubborn stains, a second application and additional scrubbing may be required

Purpose
Designed to clean the hydrocarbons, grime, dirt, stains, and foul odors from bilges with ease.
Use once per month or as often as needed to keep your bilge clean, and odor-free.

Use on
Bilge cleaner, engine rooms, boat decks, hulls.

Directions
If bilge contains fuel or oil, use absorbent material to soak up as much as possible before using Properly dispose the absorbent material according to your area's regulations. Pour one quart (32l oz) per 25' of boat into bilge to clean the hydrocarbons, grime, dirt, stains, and foul odors. If boat is smaller than 25', use proportional amount per foot of boat.
For dry bilges, add fresh water. Run boat with cleaner for at least one hour, the boat's motion will allow the product to break down dirt, forming a uniform emulsion that can be easily disposed of by draining or pumping out bilge at an authorized pump-out station. Use once per month or as often as needed to keep your bilge clean, and odor-free.

Purpose
Concentrated, boat wash fortified with Carnauba Wax. High-sudsing formula removes dirt and leaves an abrasion resistant wax coating that makes water bead up reducing salt and hard water deposits.

Use on
Can be used on all surfaces: Ceramic Coatings, Pre-Waxed Surfaces, Teak Wood, Fiberglass, Plexiglas, Vinyl, Metal, Glass, Plastics, Rubber, Painted Surfaces, Carpets, and Decals.

Directions
Wet Surface to be cleaned thoroughly before applying. Mix at least 4 ounces per gallon of water. Apply with cloth, sponge or brush. Scrub as necessary and rinse.
Dilution may be adjusted as needed to accommodate soil conditions.

Purpose
New acid replacement technology that performs as well as many acids without the health and safety and health concerns. This non-acid, non-fuming, and low pH formula is designed to remove scum lines, rust stains, scale, and hard water deposits.

Use on
Fiberglass, Plastic, Iron, Rubber, and Painted Surfaces

Directions
Remove boat from water and bring to an approved boat wash area or facility.
Allow deposits and stains to dry completely before applying. We recommend spot testing before use. Apply using an all-plastic sprayer, non-nylon roller or brush making sure to saturate the area to be cleaned. Allow at least 10 minutes for cleaner to penetrate, then pressure wash or rinse well with clean water.
Heavy deposits may require more than one application and some light scraping.

NOTE: DO NOT allow cleaner to dry on the surface.

Purpose
Ceramic Spray & Shine treated surfaces are extremely hydrophobic and water-resistant/repellent. Helps prevent damage from weathering. UV resistant and produces streak free high gloss protection.

Use on
Great for use on boats, automobiles, RVs, and campers.

Directions
SHAKE WELL BEFORE USE.
If necessary wash & rinse surface. Apply a fine mist to clean area. Wipe in using a clean microfiber towel. Buff with a new clean microfiber towel. Coat one area or section at a time, move to the next and repeat process for streak free high gloss protected surface.

Purpose
New acid replacement technology that quickly and effortlessly removes dirt, soot, oxidation, and other soils, such as calcium/limescale/silicate deposits, and will not frost glass.

Use on
Un-painted aluminum.

Directions
Generously spray starting from the bottom and work upward using sprayer included. Cover a 4 foot section at a time. Allow to sit 2 to 5 minutes, brush if heavy soiled, the rinse from the top down. Keep surface wet with cleaner until ready to rinse. We recommend to spot test on an inconspicuous area before use.

Purpose
Removes embedded salt and salt residue without harming painted or finished surfaces. Dissolves and eliminates any harmful salt particles and debris, leading to corrosion, vehicle damage, and rust, from different vehicle/marine engines and cooling systems.

Use on
Any surface exposed to salt. Boats, trucks, auto/RV, trailers, dive gear, fishing tackle, tubes/towables, motorcycles, jet skis, and much more!

Directions (RTU)
Spray on surface to be treated. Let application soak into salt for 2-5 minutes. Heavy salt build up may require scrubbing with a brush. Rinse and let air dry.
DIRECTIONS (CONCENTRATE)
Mix with clean water at a 1:60 (2.1 oz. per(gallon up to 1:100 ratio (1.28 oz./gallon). Wet surface thoroughly with product and allow to stand for at least 2-5 minutes. Rinse with clean water. Wipe or blow dry if desired.

To flush outboard/Inboard/Outdrive/Cooling Systems & Heat Exchangers:
Mixer is required. Attach mixer to garden hose. Remove reservoir cup, fill with cleaner and reinstall. Connect other end of mixer to flushing apparatus and turn on water. Flush motor for 2-5 minutes.

To Remove Salt & Protect Surfaces:
Attach mixer to garden hose. Remove reservoir cup, fill with cleaner and reinstall, connect other end of mixer to garden hose spray nozzle. Turn on fresh water. Spray on any surface.

To Soak Gear & Equipment:
Mix 1 oz. of concentrate per 1 gallon of water in a pail. Soak gear or equipment and scrub if necessary. Rinse with fresh water.