INSTANT SALT REMOVER & PROTECTANT – Concentrate

**NEW**  BOOYAH CLEAN INSTANT SALT REMOVER & PROTECTANT

Clean and protect your boat, engine, gear, and trailer after every saltwater outing. This product is tough on salt but gentle on surfaces and the environment.

Booyah Clean Instant Salt Remover & Protectant is a concentrated formula designed to dissolve and remove embedded salt and salt residue before it can cause corrosion, surface damage, or rust. Safe for use on painted and finished surfaces, it also adds a protective barrier to help prevent future salt damage.

This product is EPA SAFER CHOICE CERTIFIED for direct release, making it safe to use in marinas, slips, or on dry land where collecting or treating wash water is not practical.

Safe for use on: fiberglass, steel, aluminum, glass, magnesium, isinglass, wood, chrome, plastics, rubber, waxed finishes, and ceramic coatings.

Use Booyah Clean Instant Salt Remover to:

• Flush outboard, inboard, outdrive, and cooling systems
• Rinse away salt from hulls, trailers, and topsides
• Soak and protect tools, gear, and equipment
• Help prevent long-term corrosion and surface damage

DIRECTIONS

General Use: Mix with clean water at a 1:60 ratio (2.1 oz per gallon) up to 1:100 (1.28 oz per gallon). Wet the surface thoroughly and allow the product to sit for at least 30 seconds. Rinse with clean water. Wipe or blow dry if desired.

To Flush Outboard/Inboard/Outdrive/Cooling Systems and Heat Exchangers:
Attach a mixer to a garden hose. Remove the reservoir cup, fill it with Instant Salt Remover, and reinstall. Connect the other end to your flushing port and run for 2 to 5 minutes. For best results, do not flush with water after applying.

To Remove Salt and Protect Surfaces:
Attach the mixer to a hose and apply to the surface. Rinse thoroughly with fresh water.

To Soak Gear and Equipment:
Mix 1 oz of concentrate per 1 gallon of water in a bucket or pail. Soak the item, scrub if needed, then rinse with fresh water.